Home › Heat Pump Hot Water Rowville
Plumber checking the copper connections on a new all-in-one heat pump hot water unit beside a brick wall
Heat pumps · Rowville VIC 3178

Heat Pump Hot Water Rowville

Thinking about moving off an old electric cylinder to something cheaper to run? Heat pumps are installed and serviced throughout Rowville, sited properly for airflow and quiet. Ring 03 9088 0246.

  • Licensed and insured
  • Based in Rowville 3178
  • Cost agreed before work
  • Urgent call-outs

How a heat pump works

A heat pump hot water system does not create heat with an element the way an electric cylinder does. Instead it uses a fan and compressor, much like a reverse-cycle air conditioner, to draw warmth out of the surrounding air and transfer it into the water stored in the tank.

Because it is moving heat rather than generating it, a heat pump can use around a quarter to a third of the electricity of a standard electric storage system to heat the same amount of water. Even on cool Melbourne mornings there is enough warmth in the air for the system to work, although it works hardest in winter.

There are two main types:

  • All-in-one units, with the fan and compressor mounted on the cylinder's lid. These are the most common choice for homes.
  • Split systems, where the compressor unit sits separately from the tank, a bit like an air conditioner's outdoor unit. These can suit tighter spaces or where noise needs to be kept away from bedrooms.

Why heat pumps suit Rowville

Most Rowville homes are well suited to heat pumps. Typical blocks have a side passage, a corner of the backyard or a spot beside the garage with enough space and airflow. Many households are replacing original electric or ageing solar systems, and a heat pump offers lower running costs without the need for roof collectors.

Families with several bathrooms, common in Rowville, often need a decent sized tank. Heat pumps come in a range of capacities, so we can match the system to the household. Our guide comparing heat pumps and electric storage goes into the trade-offs.

Positioning matters

A heat pump needs:

  • Airflow. It draws air across the evaporator, so it should not be boxed in or tucked into a cramped corner.
  • A level, stable base that can take the weight of a full tank.
  • Access for servicing and future replacement.
  • Consideration for noise. A heat pump runs at a level similar to an air conditioner. We avoid placing it directly under bedroom windows or right against a neighbour's fence where possible, and many units can be set to heat during the day.
  • A safe drain for condensation and the relief valve.

We look at your property and suggest the best spot, explaining the pros and cons of each option.

Installation

A heat pump installation includes removing the old system, preparing the base, connecting the water supply and hot water lines, fitting a relief valve with a proper drain, a tempering valve for bathroom hot water, a pressure limiting valve where needed and the required isolation and non-return valves. An electrician connects the power where required.

Once installed, we commission the system, check for leaks, confirm the temperature settings and show you how the controls work. As with any hot water installation, we issue a compliance certificate.

Rebates

Heat pump systems often qualify for incentives through the Victorian Government's Solar Homes and Victorian Energy Upgrades programs, as well as federal small-scale technology certificates. The rules and amounts change, so we will explain what may apply to your home at the time of quoting.

Heat pump repairs

If your heat pump is not heating properly, is making unusual noises or is leaking, we can help. Common faults include:

  • Blocked air filters or fins reducing efficiency
  • Fan faults or obstructions
  • Faulty temperature sensors or controllers
  • Leaking relief, tempering or isolation valves
  • Condensate drain blockages
  • Element faults in units with a backup booster

We repair the plumbing side of heat pump systems and work with manufacturers on warranty claims for refrigeration components.

Looking after a heat pump

  • Keep the area around the unit clear of plants, stored items and leaves.
  • Clean the air filter if your model has one, following the manual.
  • Check the relief valve every six months by lifting the lever gently.
  • Have the tempering valve checked every few years.
  • Book a service periodically, as recommended by the manufacturer.

Is a heat pump right for you?

Heat pumps cost more upfront than a simple electric storage cylinder, but running costs are much lower, and rebates can reduce the purchase price. If you plan to stay in your home for several years, a heat pump usually works out cheaper over its life. If you are selling soon or need the quickest possible replacement, a straightforward electric unit may suit better.

We are happy to talk through both options and quote on each so you can compare.

Heat pump hot water in nearby suburbs

We install and repair heat pump systems across Rowville, Lysterfield, Scoresby, Knoxfield, Ferntree Gully, Wheelers Hill, Mulgrave, Dandenong North and Endeavour Hills.

Included

What you get with heat pump installation

Diagnosis
We trace the fault with the right gear (camera, locator, thermal imager, gauge) and show you what we found
Your price
Talked through on site before we start, and set out in writing for larger work
Who does it
A Victorian licensed plumber, insured, with the licence class the job calls for
Parts
WaterMark approved fittings and fixtures, fitted to the Australian Standards
Records
A compliance certificate where the law needs one, and before and after photos on request
Finish
Repair tested in front of you, floors and benches wiped down, old parts gone with us
Questions we hear

Heat Pump Installation in Rowville: your questions

Do heat pumps work in Melbourne winters?

Yes. They work harder in cold weather and take longer to heat, but a correctly sized system will still provide plenty of hot water. Many also have a backup element.

Are heat pumps noisy?

They make a low hum similar to an air conditioner. Careful positioning and daytime heating settings keep noise to a minimum.

How much space does a heat pump need?

An all-in-one unit needs a level base roughly the footprint of a standard cylinder, plus clearance around it for airflow and servicing.

Can I get a rebate on a heat pump?

Many heat pumps qualify for Victorian and federal incentives. We can explain current eligibility when we quote.

How long does a heat pump last?

With reasonable care, many heat pump systems last ten to fifteen years or more. Regular checks help.

Can you replace my solar system with a heat pump?

Yes. This is a common upgrade in Rowville, particularly when an older solar system needs major repairs.

Book or ask for a quote

Send us the details

Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.

03 9088 0246

We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.







    What to expect

    How a Rowville Plumbing job works

    1. Step 1Tell us the problem

      Ring or send the form with what has gone wrong and where. A photo of the leak, the drain or the hot water label means we turn up with the right parts.

    2. Step 2Diagnosis and price

      We track down the cause, show you what we found and give you the cost. Nothing gets pulled apart until you say go.

    3. Step 3Repair and test

      The work is done to the Victorian plumbing rules and Australian Standards, then tested in front of you. Regulated work gets a compliance certificate.

    4. Step 4Clean up and check in

      Floors and benches are left as we found them, old parts leave with us, and on bigger jobs we ring a few days later to make sure all is well.

    Where we work

    Rowville, Stud Park and the suburbs around Lysterfield

    We are based in Rowville, between EastLink and the Lysterfield hills, so most jobs are a few minutes from Stud Park. From here it is a quick run up Stud Road to Knoxfield and Scoresby, east to Lysterfield and Ferntree Gully, across Wellington Road to Wheelers Hill and Mulgrave, and south over Police Road to Dandenong North and Endeavour Hills. Somewhere else nearby? Ring 03 9088 0246 and ask.

    Plumbing problem in Rowville?

    Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.