Home › Toilet Repairs Rowville
Plumber fitting a new inlet valve inside the open cistern of a white close-coupled toilet
Toilets · Rowville VIC 3178

Toilet Repairs Rowville

Cistern refilling on its own, a button that sticks or a puddle at the base of the pan? We repair and replace toilets in homes across Rowville. Ring 03 9088 0246.

  • Licensed and insured
  • Based in Rowville 3178
  • Cost agreed before work
  • Urgent call-outs

Toilet faults we fix every week

A cistern that keeps running

A faint trickle in the pan, or a cistern that tops itself up every few minutes, means water is leaking through between flushes. It is a common fault and a wasteful one, sometimes losing hundreds of litres a day. The cause is usually one of two valves:

  • The inlet valve, which lets water into the cistern and shuts off when it is full. If it does not close properly, water rises to the overflow and runs into the bowl.
  • The outlet valve, the seal that opens to send the flush down. If its seal is worn or dirty, water seeps past it constantly.

Our guide running toilet: inlet or outlet? explains how to tell which one is at fault.

Weak or incomplete flush

If the toilet does not clear the bowl properly, the cistern may not be filling to the correct level, the outlet valve may not be opening fully, or the flush button mechanism may be out of adjustment. A partial blockage in the pan or drain can also cause a weak flush.

Button sticking or not working

Push-button cisterns use a mechanism connecting the button to the outlet valve. If the button sticks, does not return or needs to be pressed several times, the mechanism may be worn, broken or out of adjustment.

Leaking at the base of the pan

A puddle at the pan's base can be a perished pan connector, a weeping hose or stop tap, sweating in humid weather, or a cracked bowl. A leak at the base should be fixed quickly because it can damage flooring, soak into the subfloor or slab edge and cause odours.

Wobbly toilet

A pan that rocks or moves when you sit on it may have loose fixings or a damaged floor flange, or the floor beneath may have moved. Left alone, the movement can break the seal and cause leaks.

Leaking cistern

Water dripping from under the cistern can come from the connection between the cistern and pan, the inlet connection or a crack in the cistern. We find the source and repair it.

Toilets in Rowville homes

Most Rowville homes have at least two toilets, and many have three: one in the main bathroom, one in the ensuite and a separate toilet near the bedrooms or laundry. Many original suites have been replaced over the years, but there are still plenty of older close-coupled toilets with cisterns that are hard to find parts for. Where parts are available we repair the existing suite. Where they are not, or the suite is worn out, we can supply and install a new one.

Replacing a toilet suite

A new toilet suite can save water, look better and solve ongoing problems. Modern dual-flush toilets use far less water than older single-flush models. When choosing a new suite, we look at:

  • The waste connection, whether it goes through the floor or the wall, and the set-out distance from the wall
  • The shape and size of the pan and how it suits the room
  • Height and comfort, including higher pans for older users
  • WaterMark certification and WELS water efficiency rating

We remove the old suite, fit the new one with a new pan connector and seal, connect it with a new flexible hose, test it and take the old one away.

Our toilet repair process

  1. You ring 03 9088 0246 and describe the problem.
  2. We diagnose the fault on site and explain the fix.
  3. You get the price before we start.
  4. We repair or replace the faulty parts or the whole suite.
  5. We test the flush, refill and seals, and check the flexible hose and isolation tap.

Blocked toilets

If your toilet is blocked rather than broken, see blocked toilets and sinks. If more than one toilet or drain is slow, the problem may be in the main sewer. See blocked drains.

Toilet repairs in nearby suburbs

We repair and replace toilets across Rowville, Lysterfield, Scoresby, Knoxfield, Ferntree Gully, Wheelers Hill, Mulgrave, Dandenong North and Endeavour Hills.

Included

What you get with toilet fixes and new suites

Diagnosis
We trace the fault with the right gear (camera, locator, thermal imager, gauge) and show you what we found
Your price
Talked through on site before we start, and set out in writing for larger work
Who does it
A Victorian licensed plumber, insured, with the licence class the job calls for
Parts
WaterMark approved fittings and fixtures, fitted to the Australian Standards
Records
A compliance certificate where the law needs one, and before and after photos on request
Finish
Repair tested in front of you, floors and benches wiped down, old parts gone with us
Questions we hear

Toilet Fixes and New Suites in Rowville: your questions

Why does my toilet keep running?

Most often the fill valve is not closing, or the flush seal has worn and lets water slip into the bowl. Both can be repaired.

How can I tell if my toilet is leaking into the bowl?

Add some food dye to the cistern and leave it unflushed for twenty minutes. Colour in the pan points to the flush seal.

Can you repair an old toilet?

Often, yes, if parts are available. If not, we can supply and fit a new suite.

What causes a puddle at the foot of the toilet?

A failed pan seal, a leaking hose or tap, a cracked pan or condensation are the usual causes. We find the source and fix it.

How long does it take to install a new toilet?

A straightforward replacement usually takes a couple of hours.

Can I choose my own toilet suite?

Yes, as long as it is WaterMark certified and suits your waste connection. We can help check before you buy.

Book or ask for a quote

Send us the details

Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.

03 9088 0246

We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.







    What to expect

    How a Rowville Plumbing job works

    1. Step 1Tell us the problem

      Ring or send the form with what has gone wrong and where. A photo of the leak, the drain or the hot water label means we turn up with the right parts.

    2. Step 2Diagnosis and price

      We track down the cause, show you what we found and give you the cost. Nothing gets pulled apart until you say go.

    3. Step 3Repair and test

      The work is done to the Victorian plumbing rules and Australian Standards, then tested in front of you. Regulated work gets a compliance certificate.

    4. Step 4Clean up and check in

      Floors and benches are left as we found them, old parts leave with us, and on bigger jobs we ring a few days later to make sure all is well.

    Where we work

    Rowville, Stud Park and the suburbs around Lysterfield

    We are based in Rowville, between EastLink and the Lysterfield hills, so most jobs are a few minutes from Stud Park. From here it is a quick run up Stud Road to Knoxfield and Scoresby, east to Lysterfield and Ferntree Gully, across Wellington Road to Wheelers Hill and Mulgrave, and south over Police Road to Dandenong North and Endeavour Hills. Somewhere else nearby? Ring 03 9088 0246 and ask.

    Plumbing problem in Rowville?

    Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.