Home › Braided flexible hoses: check them before they burst
Guide · Rowville homes

Braided flexible hoses: check them before they burst

Burst flexible hoses are one of the most common causes of water damage in Rowville homes. They are cheap to replace and expensive to ignore.

What they are

Braided flexible hoses connect taps, mixers, toilets and some appliances to the water pipes in the wall. They have a rubber inner tube wrapped in a woven stainless steel braid, with crimped fittings at each end. They are easy to install, which is why they are everywhere: under kitchen sinks, under vanities, behind toilets and in laundries.

Why they fail

  • The braid corrodes. Cleaning products stored under sinks, damp cupboards and chlorinated water all speed up corrosion. Once the braid weakens, the rubber inner can balloon and burst.
  • The rubber perishes. Over time, the inner tube hardens and cracks.
  • Kinks and twisting. Hoses installed with sharp bends or twists are stressed and fail sooner.
  • High water pressure. Many Rowville homes have high mains pressure, which puts constant strain on hoses.
  • Poor-quality hoses. Non-certified hoses may not meet Australian Standards.

Why it matters

A flexible hose is under full mains pressure all the time, even when the tap is off. When one bursts, water can flow at a high rate until someone notices and turns it off. If it happens overnight or while you are out, the damage to cabinetry, floors and walls can be extensive.

How to check your hoses

Look under every sink, vanity and laundry tub and behind each toilet. Replace a hose if you see:

  • Rust or discolouration on the braid
  • Fraying or broken strands
  • Bulging or a lump in the hose
  • Corrosion at the crimped ends
  • Kinks or sharp bends
  • Any sign of water or dampness

If your home still has its original hoses, or you do not know how old they are, replacing them is a sensible precaution.

How often to replace

Manufacturers often suggest checking hoses regularly and replacing them at intervals recommended in their instructions. In practice, if a hose is showing any of the signs above, replace it.

Make sure the replacement is right

Replacement hoses should be WaterMark certified, the correct length so they are not stretched or kinked, and installed with isolation valves you can reach. Installing them is regulated plumbing work.

While you are under the sink

Check that the isolation valves turn and are not seized. These let you stop a leak at the fixture without turning off the whole house. Our guide on shutting off the water covers this.

When to call

We replace flexible hoses as a standalone job or alongside tap and toilet repairs. See leaking tap repairs and burst pipe repairs, or ring 03 9088 0246.

Book or ask for a quote

Send us the details

Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.

03 9088 0246

We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.







    Homeowner guides

    More guides

    Clay soil and pipe joints in RowvilleWhy Rowville's reactive clay soil works pipe joints loose, how that leads to roots and blockages, and what you can do about it.Planning an ensuite renovation in RowvilleThe plumbing questions to sort out early when renovating a Rowville ensuite or bathroom, from moving fixtures to mixer heights and leaks behind old tiles.Heat pump or electric storage hot water?Comparing heat pump and electric storage hot water for Rowville homes: running costs, upfront cost, space, noise, rebates and which suits your household.Water bill jumped? How to check for a leakA simple meter test to check for hidden leaks, the most common places leaks hide in Rowville homes, and what to do next.Hot water temperature and scald safetyWhy stored hot water must be at least 60°C, why bathroom hot water is limited to 50°C, and how tempering valves keep your family safe.How long does a hot water unit last?How long electric, solar and heat pump hot water systems usually last, the warning signs of a failing unit, and how to get more years out of yours.Running toilet: inlet or outlet valve?How to work out why your toilet keeps running, test the inlet and outlet valves yourself, and know when to call a plumber.Slow drains: early warnings and what they meanHow to read slow, gurgling and smelly drains, tell a fixture blockage from a main sewer problem, and keep kitchen and laundry drains flowing.Stormwater checks before winterA simple checklist to get gutters, downpipes, pits and stormwater pipes ready for winter rain in Rowville, and the warning signs to watch for.Finding and shutting off your water meterWhere to find the water meter on a typical Rowville property, how to turn off the water in an emergency, and what to do if the valve is stuck.

    Plumbing problem in Rowville?

    Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.