Home › Finding and shutting off your water meter
Guide · Rowville homes

Finding and shutting off your water meter

When a pipe bursts, the fastest way to stop the damage is to turn off the water at the meter. Here is where to look on a Rowville property and how to do it.

Where the meter usually is

On most Rowville properties, the water meter sits near the front boundary, close to where the water service enters from the street. Common spots include:

  • In the garden bed beside the driveway
  • Under a small plastic or metal lid set into the lawn or nature strip side of the front yard
  • Near the front fence or letterbox, sometimes hidden behind shrubs
  • Beside a side gate on corner blocks

In units and townhouses, meters are often grouped together near the street frontage or in a common area, each labelled with a unit number.

If you cannot find it, check your South East Water bill, which may show the meter location, or ask a neighbour where theirs is. Properties in the same street often have meters in similar positions.

How to turn it off

The meter has a valve on the inlet side, between the street and the meter itself.

  • Tap-style handle: turn it clockwise until it stops.
  • Lever handle: turn it so the lever sits across the pipe rather than along it.

Once it is off, open a tap inside the house to check the water has stopped and to release pressure in the pipes.

If the valve will not turn

Meter valves that have not been used for years can be stiff. Try firm, steady pressure. Do not use a large wrench or hit it, because you could break the valve or the pipe. If it will not move, ring 03 9088 0246 and, if it is a real emergency, South East Water's faults line.

Do a test run now

Find your meter and try the valve once now, when nothing is wrong. Clear away soil, mulch or plants covering it. If the valve is stiff, seized or leaking, have it looked at before you need it. Show everyone in the household where it is.

Isolation valves inside

You may not need to turn off the whole house. Many fixtures have their own isolation valves:

  • Toilets: a small tap on the wall behind the cistern
  • Basins and sinks: small taps on the hot and cold lines under the vanity or sink
  • Washing machines: the laundry taps
  • Hot water systems: a valve on the cold water inlet

Turning off the right isolation valve stops a leak at that fixture while keeping water to the rest of the house.

After you turn the water off

Switch off power to any wet areas and to an electric hot water system, then ring 03 9088 0246. See emergency plumbing for what to do next.

Book or ask for a quote

Send us the details

Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.

03 9088 0246

We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.







    Homeowner guides

    More guides

    Braided flexible hoses: check them before they burstWhy braided flexible hoses under sinks, vanities and toilets fail, how to spot a hose at risk, and why replacing them early prevents floods.Clay soil and pipe joints in RowvilleWhy Rowville's reactive clay soil works pipe joints loose, how that leads to roots and blockages, and what you can do about it.Planning an ensuite renovation in RowvilleThe plumbing questions to sort out early when renovating a Rowville ensuite or bathroom, from moving fixtures to mixer heights and leaks behind old tiles.Heat pump or electric storage hot water?Comparing heat pump and electric storage hot water for Rowville homes: running costs, upfront cost, space, noise, rebates and which suits your household.Water bill jumped? How to check for a leakA simple meter test to check for hidden leaks, the most common places leaks hide in Rowville homes, and what to do next.Hot water temperature and scald safetyWhy stored hot water must be at least 60°C, why bathroom hot water is limited to 50°C, and how tempering valves keep your family safe.How long does a hot water unit last?How long electric, solar and heat pump hot water systems usually last, the warning signs of a failing unit, and how to get more years out of yours.Running toilet: inlet or outlet valve?How to work out why your toilet keeps running, test the inlet and outlet valves yourself, and know when to call a plumber.Slow drains: early warnings and what they meanHow to read slow, gurgling and smelly drains, tell a fixture blockage from a main sewer problem, and keep kitchen and laundry drains flowing.Stormwater checks before winterA simple checklist to get gutters, downpipes, pits and stormwater pipes ready for winter rain in Rowville, and the warning signs to watch for.

    Plumbing problem in Rowville?

    Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.