Planning an ensuite renovation in Rowville
Many Rowville ensuites date from the late eighties and nineties. If yours is due for a refresh, sorting out the plumbing questions early saves time, money and frustration.
Start with the layout
Moving fixtures is the biggest plumbing decision in a renovation.
Keeping fixtures in place is usually simplest. The existing drainage and water lines can be reused or upgraded with less work.
Moving the toilet can be more involved, because the toilet waste needs adequate fall and a suitable connection. In slab homes, moving a toilet often means cutting the slab.
Moving the shower requires a new floor waste with correct falls. Converting a shower over a bath to a walk-in shower, or widening a shower, is common in Rowville ensuites.
Moving the vanity is usually straightforward, but the waste and water lines need to reach the new position.
We can look at your layout before demolition and tell you what is involved.
Floor type
Rowville homes are mostly built on concrete slabs, with some on timber floors over stumps, particularly on sloping blocks. Slab homes need cutting and patching to move drainage, while timber floors allow more flexibility underneath. Knowing which you have helps with planning.
Check for existing leaks
Old ensuites often hide leaks behind the tiles. Failed waterproofing and leaking shower bases can damage the wall frame, floor and slab edge. When the room is stripped, we inspect the exposed plumbing and you will see any damage that needs repair before the new room goes in.
Choose fixtures early
Mixer heights, shower rose positions, wall-hung vanities, in-wall cisterns and niche positions all depend on the fixtures you choose. Give your plumber the fixture specifications before rough-in so everything is set out correctly.
Hot water supply
If you are adding a bigger shower, a second shower head or a freestanding bath, check that your hot water system can keep up. It may be a good time to consider an upgrade. See hot water replacement.
Water pressure
High pressure can affect mixers and fixtures. If your home does not have a pressure limiting valve, consider fitting one during the renovation. See water pressure problems.
Sequence of trades
A typical renovation sequence is demolition, plumbing rough-in, electrical, carpentry, waterproofing, tiling, then plumbing fit-off. Good coordination avoids delays and rework.
Compliance
All plumbing work must be done by a licensed plumber, with a compliance certificate where required. Waterproofing is done by a licensed waterproofer.
For help planning your ensuite, see bathroom renovation plumbing or ring 03 9088 0246.
Send us the details
Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.
We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.
More guides
Plumbing problem in Rowville?
Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.