
Leak Detection Rowville
Water bill jumped, a damp patch that will not dry or the meter ticking over with every tap off? We find hidden leaks in Rowville homes before anything is cut open. Ring 03 9088 0246.
- Licensed and insured
- Based in Rowville 3178
- Cost agreed before work
- Urgent call-outs
Signs of a hidden leak
Hidden leaks can run for months before anyone notices. These are the clues to look for:
- A water bill much higher than usual without a change in household use
- The water meter moving when every tap and appliance is off
- Damp patches, stains or bubbling paint on walls or ceilings
- Skirting boards swelling or flooring lifting near a bathroom or kitchen
- Musty smells or mould in a room that should be dry
- Lush green patches or soggy ground in the yard
- Low water pressure for no obvious reason
- Sound of running water when nothing is turned on
Our guide to checking for a leak when your water bill jumps shows you how to do a simple meter test yourself.
Where leaks hide in Rowville homes
Showers and ensuites
Rowville homes typically have a main bathroom and an ensuite, and many of those wet areas are now thirty years old. Leaking shower bases, failed waterproofing, loose waste connections and cracked grout let water escape under the tiles or into the wall. The water might show up in the next room, under carpet or along the slab edge outside.
Pipes inside walls and ceilings
In slab homes, water pipes run through walls and ceilings. A pinhole in a copper hot water line or a loose joint can leak for a long time before staining the plaster.
Under the floor
In homes on stumps, leaks under the floor can soak the subfloor for months unnoticed. Signs include a musty smell, dampness around the base of walls and floorboards cupping or lifting.
Water service pipes
The underground pipe from the meter to the house can leak because of age, ground movement in clay soil or root pressure. A leak here might show as a wet patch in the lawn or simply as a rising water bill.
Toilets and taps
A running cistern or dripping tap is a visible leak, but it can still waste a lot of water. These are quick to check and fix.
Hot water systems
Leaking relief valves, fittings or a failing cylinder can waste water and drive up power bills. See hot water repairs.
Our leak detection tools
We use a combination of methods to find leaks without unnecessary damage.
- Meter testing. We confirm a leak exists and estimate how much water is being lost.
- Isolation testing. By shutting off different parts of the system, we narrow down which section is leaking.
- Pressure testing. We test pipes under pressure to confirm whether they hold or are leaking.
- Thermal imaging. A thermal camera shows temperature differences behind walls, ceilings and floors. Hot water leaks show up clearly, and cold water leaks often show as cooler areas where water is evaporating.
- Moisture meters. These measure moisture in plaster, timber and masonry to map the spread of water and find its source.
- Acoustic listening. Specialist equipment helps pick up the sound of water escaping from pressurised pipes, including underground.
- Camera inspection. For drain and waste leaks, a camera shows cracks, displaced joints and failed connections.
Once we find the leak
We show you where it is, explain what we found and give you the cost of repair before starting. We then open only the area needed to access the pipe, repair it and pressure test the system.
If the leak is from a shower base or failed waterproofing, we repair the plumbing side, such as the waste, mixer or pipes, and tell you whether the tiles and waterproofing need attention from a waterproofer or tiler.
Leak reports for insurance and strata
If you need to make an insurance claim or deal with a body corporate, we can provide a written report with photos and thermal images showing the source of the leak and the repair.
Water authority concessions
If you have had an unusually high water bill because of a hidden leak, South East Water may offer a concession once the leak is repaired. They usually ask for evidence such as a plumber's invoice or report. We can provide what you need.
Leak detection in nearby suburbs
We find hidden leaks across Rowville, Lysterfield, Scoresby, Knoxfield, Ferntree Gully, Wheelers Hill, Mulgrave, Dandenong North and Endeavour Hills.
What you get with hidden leak detection
- Diagnosis
- We trace the fault with the right gear (camera, locator, thermal imager, gauge) and show you what we found
- Your price
- Talked through on site before we start, and set out in writing for larger work
- Who does it
- A Victorian licensed plumber, insured, with the licence class the job calls for
- Parts
- WaterMark approved fittings and fixtures, fitted to the Australian Standards
- Records
- A compliance certificate where the law needs one, and before and after photos on request
- Finish
- Repair tested in front of you, floors and benches wiped down, old parts gone with us
Hidden Leak Detection in Rowville: your questions
How do I know if I have a hidden leak?
With every tap and appliance off, photograph the meter dial, wait half an hour without using water, then compare. If it has moved, water is escaping somewhere.
Can you find a leak without breaking walls?
Yes. Thermal imaging, moisture meters, pressure testing and acoustic tools let us find most leaks before opening anything up.
My shower is leaking into the next room. Can you help?
Yes. We find whether the leak is in the supply pipes, mixer, waste or waterproofing, fix the plumbing side and advise on the rest.
Can you help with an insurance claim?
We provide written reports with photos and thermal images showing the leak source and the repair.
Will South East Water reduce my bill?
They may offer a concession for leaks that have been repaired. Ask them about their leak allowance and keep our invoice and report.
How long does leak detection take?
Many leaks are found in an hour or two. Complex or intermittent leaks can take longer.
Before you call, read this
Send us the details
Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.
We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.
How a Rowville Plumbing job works
- Step 1Tell us the problem
Ring or send the form with what has gone wrong and where. A photo of the leak, the drain or the hot water label means we turn up with the right parts.
- Step 2Diagnosis and price
We track down the cause, show you what we found and give you the cost. Nothing gets pulled apart until you say go.
- Step 3Repair and test
The work is done to the Victorian plumbing rules and Australian Standards, then tested in front of you. Regulated work gets a compliance certificate.
- Step 4Clean up and check in
Floors and benches are left as we found them, old parts leave with us, and on bigger jobs we ring a few days later to make sure all is well.
Other plumbing work we do in Rowville
- Urgent Plumbing Call-Outs
- Blocked Drain Clearing
- Hot Water Fault Finding
- New Hot Water Systems
- Heat Pump Installation
- Burst and Split Pipes
- Dripping Taps and Mixers
- Toilet Fixes and New Suites
- Blocked Toilet or Sink
- CCTV Drain Inspection and Relining
- Stormwater Pits and Drains
- Low or High Water Pressure
- Ensuite and Bathroom Renovations
- Gutter and Downpipe Replacement
Rowville, Stud Park and the suburbs around Lysterfield
We are based in Rowville, between EastLink and the Lysterfield hills, so most jobs are a few minutes from Stud Park. From here it is a quick run up Stud Road to Knoxfield and Scoresby, east to Lysterfield and Ferntree Gully, across Wellington Road to Wheelers Hill and Mulgrave, and south over Police Road to Dandenong North and Endeavour Hills. Somewhere else nearby? Ring 03 9088 0246 and ask.
Plumbing problem in Rowville?
Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.