Home › Planning an ensuite renovation in Rowville
Guide · Rowville homes

Planning an ensuite renovation in Rowville

Many Rowville ensuites date from the late eighties and nineties. If yours is due for a refresh, sorting out the plumbing questions early saves time, money and frustration.

Start with the layout

Moving fixtures is the biggest plumbing decision in a renovation.

Keeping fixtures in place is usually simplest. The existing drainage and water lines can be reused or upgraded with less work.

Moving the toilet can be more involved, because the toilet waste needs adequate fall and a suitable connection. In slab homes, moving a toilet often means cutting the slab.

Moving the shower requires a new floor waste with correct falls. Converting a shower over a bath to a walk-in shower, or widening a shower, is common in Rowville ensuites.

Moving the vanity is usually straightforward, but the waste and water lines need to reach the new position.

We can look at your layout before demolition and tell you what is involved.

Floor type

Rowville homes are mostly built on concrete slabs, with some on timber floors over stumps, particularly on sloping blocks. Slab homes need cutting and patching to move drainage, while timber floors allow more flexibility underneath. Knowing which you have helps with planning.

Check for existing leaks

Old ensuites often hide leaks behind the tiles. Failed waterproofing and leaking shower bases can damage the wall frame, floor and slab edge. When the room is stripped, we inspect the exposed plumbing and you will see any damage that needs repair before the new room goes in.

Choose fixtures early

Mixer heights, shower rose positions, wall-hung vanities, in-wall cisterns and niche positions all depend on the fixtures you choose. Give your plumber the fixture specifications before rough-in so everything is set out correctly.

Hot water supply

If you are adding a bigger shower, a second shower head or a freestanding bath, check that your hot water system can keep up. It may be a good time to consider an upgrade. See hot water replacement.

Water pressure

High pressure can affect mixers and fixtures. If your home does not have a pressure limiting valve, consider fitting one during the renovation. See water pressure problems.

Sequence of trades

A typical renovation sequence is demolition, plumbing rough-in, electrical, carpentry, waterproofing, tiling, then plumbing fit-off. Good coordination avoids delays and rework.

Compliance

All plumbing work must be done by a licensed plumber, with a compliance certificate where required. Waterproofing is done by a licensed waterproofer.

For help planning your ensuite, see bathroom renovation plumbing or ring 03 9088 0246.

Book or ask for a quote

Send us the details

Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.

03 9088 0246

We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.







    Homeowner guides

    More guides

    Braided flexible hoses: check them before they burstWhy braided flexible hoses under sinks, vanities and toilets fail, how to spot a hose at risk, and why replacing them early prevents floods.Clay soil and pipe joints in RowvilleWhy Rowville's reactive clay soil works pipe joints loose, how that leads to roots and blockages, and what you can do about it.Heat pump or electric storage hot water?Comparing heat pump and electric storage hot water for Rowville homes: running costs, upfront cost, space, noise, rebates and which suits your household.Water bill jumped? How to check for a leakA simple meter test to check for hidden leaks, the most common places leaks hide in Rowville homes, and what to do next.Hot water temperature and scald safetyWhy stored hot water must be at least 60°C, why bathroom hot water is limited to 50°C, and how tempering valves keep your family safe.How long does a hot water unit last?How long electric, solar and heat pump hot water systems usually last, the warning signs of a failing unit, and how to get more years out of yours.Running toilet: inlet or outlet valve?How to work out why your toilet keeps running, test the inlet and outlet valves yourself, and know when to call a plumber.Slow drains: early warnings and what they meanHow to read slow, gurgling and smelly drains, tell a fixture blockage from a main sewer problem, and keep kitchen and laundry drains flowing.Stormwater checks before winterA simple checklist to get gutters, downpipes, pits and stormwater pipes ready for winter rain in Rowville, and the warning signs to watch for.Finding and shutting off your water meterWhere to find the water meter on a typical Rowville property, how to turn off the water in an emergency, and what to do if the valve is stuck.

    Plumbing problem in Rowville?

    Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.