Hot water temperature and scald safety
Hot water has to be stored hot enough to stop bacteria, but delivered cool enough not to burn. A tempering valve is what makes both possible.
Two temperature rules
Storage. Water stored in a hot water system must be kept at a minimum of 60°C. This prevents the growth of Legionella and other bacteria that can thrive in lukewarm water.
Delivery. Hot water delivered to bathrooms in homes is usually limited to a maximum of 50°C under Victorian plumbing rules for new and replacement installations. This reduces the risk of scalding, particularly for young children and older people.
How hot is too hot?
Water at 60°C can cause a serious burn in a matter of seconds. At 50°C, the time is much longer, which gives someone time to react and move away. Children's skin is thinner and burns faster, and older people may react more slowly.
How a tempering valve works
A tempering valve is fitted on the hot water line leaving the hot water unit. It mixes cold water into the hot to bring the temperature down to a set level before it reaches the bathroom taps. If the cold supply fails, a good tempering valve shuts down the hot flow to prevent scalding.
The kitchen and laundry may receive hotter water, depending on how the system is set up.
Signs your tempering valve needs attention
- Bathroom water is too hot or too cold
- Temperature fluctuates while the tap is running
- Low flow of hot water to bathrooms
- The valve is leaking
Tempering valves have moving parts and filters that can wear or clog. Manufacturers typically recommend regular checks and replacement after a number of years.
Thermostatic mixing valves
In some settings, such as aged care, hospitals and schools, thermostatic mixing valves with stricter requirements are used. For most homes, a tempering valve is the standard.
When we install or replace hot water
Every new or replacement hot water installation we carry out includes the correct temperature controls: the unit's thermostat set for safe storage, a tempering valve for bathroom delivery, and a relief valve to protect the cylinder. We test the delivery temperature at the bathroom taps before we leave.
Checking your own system
Run a bathroom hot tap for a minute and carefully test the temperature. If it seems scalding hot, or swings between hot and cold, ring 03 9088 0246 and we will check the tempering valve.
See hot water repairs and hot water replacement.
Send us the details
Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.
We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.
More guides
Plumbing problem in Rowville?
Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.