Home › How long does a hot water unit last?
Guide · Rowville homes

How long does a hot water unit last?

Many Rowville homes are on their second or third hot water system. Here is what to expect from each type, the signs a unit is nearing the end, and how to stretch its life.

Typical lifespans

There is no exact answer, because water quality, usage, installation and maintenance all play a part. As a rough guide:

  • Electric storage cylinders: often around ten to fifteen years
  • Solar hot water systems: the tank often lasts a similar time to an electric cylinder, while collectors can last longer
  • Heat pumps: commonly ten to fifteen years, sometimes more with good care

A unit installed when a Rowville home was built in the early nineties is long gone. One fitted in the mid two-thousands is now in the zone where problems become likely.

Where to find the age of your unit

Most hot water systems have a compliance plate or sticker on the side showing the model and a manufacture date or serial number that includes the date. If you cannot find it, your plumber can usually work it out from the model.

Warning signs

Water around the base

A small puddle under the cylinder can come from the relief valve drain, a fitting or condensation. But water seeping from the tank itself usually means the inner lining has corroded through, and the cylinder needs replacing.

Rusty hot water

If water from the hot taps is discoloured but the cold is clear, the cylinder may be corroding inside.

Not enough hot water

Running out sooner than you used to can mean a failing element, a scaled-up cylinder or simply a household that has outgrown the unit.

Strange noises

Rumbling and popping often come from sediment at the bottom of the tank. It reduces efficiency and can signal an ageing unit.

Frequent repairs

If you have replaced elements, thermostats and valves more than once, the unit may be telling you something.

How to make your unit last longer

Check the relief valve every six months. Lift the lever gently for a few seconds and let it snap back. This keeps the valve from seizing. If it does not reseal, call a plumber.

Have the anode checked. Storage cylinders have a sacrificial anode that corrodes so the tank does not. Replacing it before it is used up can add years to the cylinder's life.

Control high pressure. High mains pressure, common in parts of Rowville, stresses the cylinder and valves. A pressure limiting valve helps.

Keep the area clear. Leave space around the unit for airflow, inspection and servicing.

Planning ahead

If your unit is getting on, it is worth thinking about the replacement before it fails. That gives you time to compare options such as a heat pump, check rebates and avoid a rushed decision on a cold morning. See hot water replacement and our comparison of heat pumps and electric storage.

If your hot water is playing up now, see hot water repairs or ring 03 9088 0246.

Book or ask for a quote

Send us the details

Tell us about the job and a licensed Rowville plumber will ring you back. For a flood, a burst pipe or an overflowing sewer, skip the form and ring 03 9088 0246.

03 9088 0246

We do not publish a price list, because no two jobs are the same. You will know the cost before any work begins.







    Homeowner guides

    More guides

    Braided flexible hoses: check them before they burstWhy braided flexible hoses under sinks, vanities and toilets fail, how to spot a hose at risk, and why replacing them early prevents floods.Clay soil and pipe joints in RowvilleWhy Rowville's reactive clay soil works pipe joints loose, how that leads to roots and blockages, and what you can do about it.Planning an ensuite renovation in RowvilleThe plumbing questions to sort out early when renovating a Rowville ensuite or bathroom, from moving fixtures to mixer heights and leaks behind old tiles.Heat pump or electric storage hot water?Comparing heat pump and electric storage hot water for Rowville homes: running costs, upfront cost, space, noise, rebates and which suits your household.Water bill jumped? How to check for a leakA simple meter test to check for hidden leaks, the most common places leaks hide in Rowville homes, and what to do next.Hot water temperature and scald safetyWhy stored hot water must be at least 60°C, why bathroom hot water is limited to 50°C, and how tempering valves keep your family safe.Running toilet: inlet or outlet valve?How to work out why your toilet keeps running, test the inlet and outlet valves yourself, and know when to call a plumber.Slow drains: early warnings and what they meanHow to read slow, gurgling and smelly drains, tell a fixture blockage from a main sewer problem, and keep kitchen and laundry drains flowing.Stormwater checks before winterA simple checklist to get gutters, downpipes, pits and stormwater pipes ready for winter rain in Rowville, and the warning signs to watch for.Finding and shutting off your water meterWhere to find the water meter on a typical Rowville property, how to turn off the water in an emergency, and what to do if the valve is stuck.

    Plumbing problem in Rowville?

    Talk to a licensed local plumber today. You will know what is wrong and what it costs before we start.